Apollo SA5000-204APO XPERT 8 Detector Mounting Base, Black, Soteria/XP95/Discovery Compatible, Addressable Fire Alarm Base
£9.99
- Description
Description
Product OverviewThe Black XPERT 8 Base is a universal base designed for use with the Black Soteria Multi-Sensor Detector.
All detectors in the Soteria®, Discovery® and XP95® range fit into the XPERT 8 Intelligent Mounting Base. The base has a wide interior diameter for ease of access to cables and terminals.
The ‘E-Z Fit’ feature allows you to fit the base screws, place the XPERT 8 Intelligent Mounting Base over the screws, slide it into place and tighten the screws. The detector requires a clockwise rotation into the base for fitting. Additionally, the detector can be locked into the base for increased security, by a grubscrew using a 1.5mm hexagonal driver.
The XPERT 8 card, Part Number 38532-064, supplied with the base, has pre-punched pips to remove to set the address. Refer to the XPERT 8 Intelligent Mounting Base Installation Guide 39215-005 for details on how to set the address.
The Black XPERT 8 Base is a universal base designed for use with the Black Soteria Multi-Sensor Detector.
All detectors in the Soteria®, Discovery® and XP95® range fit into the XPERT 8 Intelligent Mounting Base. The base has a wide interior diameter for ease of access to cables and terminals.
The ‘E-Z Fit’ feature allows you to fit the base screws, place the XPERT 8 Intelligent Mounting Base over the screws, slide it into place and tighten the screws. The detector requires a clockwise rotation into the base for fitting. Additionally, the detector can be locked into the base for increased security, by a grubscrew using a 1.5mm hexagonal driver.
The XPERT 8 card, Part Number 38532-064, supplied with the base, has pre-punched pips to remove to set the address. Refer to the XPERT 8 Intelligent Mounting Base Installation Guide 39215-005 for details on how to set the address.
Key Features of the SA5000-204APO |
|---|
| > Wide interior diameter for ease of access to cables and terminals > ‘E-Z Fit’ allows for simple mounting of the detector base after wiring > Isolated and non-isolated devices supported > Isolated wiper – maintains loop connectivity during temporary removal of devices > Compatible with Soteria, Discovery and XP95 detectors > Supplied with XPERT 8 Card for CoreProtocol® > Base mark allows for LED detector alignment |
