C-TEC CFP 2-Zone Fire Alarm Panel is third-party certified to EN54 standards for reliability and safety. Designed with user-friendly controls and an intuitive interface, it features two detector zones, four sounder circuits, and built-in relays for fire and fault alerts. Its installer-friendly design allows for flush or surface mounting, with expansion options for repeaters and relay boards. Manufactured in the UK, it’s a trusted choice for comprehensive fire protection.
-25%
C-TEC CFP702-4 2-Zone Conventional Fire Alarm Panel | EN54 Certified, 1.5A PSU, LPCB Approved
Original price was: £199.99.£149.99Current price is: £149.99.
- Description
- Additional information
- Technical Specification
Description
C-TEC CFP 2-Zone Conventional Fire Alarm Panel – EN54 Certified
Enhance your building’s fire safety with the C-TEC CFP 2-Zone Conventional Fire Alarm Panel. Certified to EN54 parts 2, 4, and 13, this panel offers a robust array of user and installer-friendly features—all at a highly competitive price.
- Versatile Installation Options:
- Supplied in an attractive, flush mount or surface mountable plastic enclosure for seamless integration into any environment.
- Comprehensive Circuitry:
- Features two detector zones and four conventional sounder circuits.
- Includes class change and alert inputs, on-board fire and fault relays, and a combined keypad/keyswitch entry for streamlined operation.
- Advanced Engineering Functions:
- Provides selectable zone delays, coincidence, and non-latching zone facilities for tailored system performance.
- Equipped with comprehensive test and fault-finding facilities to ensure ease of maintenance and reliable operation.
Upgrade your fire alarm system with the C-TEC CFP 2-Zone Panel—a cost-effective, high-performance solution designed to meet rigorous industry standards while providing enhanced safety and peace of mind.
Additional information
| Brand | C-TEC |
|---|---|
| Product SKU | 180724 C-TEC Shelf, CFP702-4 |
| Model | CFP702-4 |
| Size | 380 W x 235 H x D 96mm |
| Color | White |
| Approvals/certifications | Certifed to EN54 Parts 2 & 4 by the LPCB., Certified to EN54-13 by Kiwa Telefication. |
|---|---|
| Mains supply | 230V 50/60Hz. |
| Mains rated current | 350mA maximum. |
| Internal power supply | 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault). |
| Total output current limited to | 1.5A @ 230Vac (ImaxA eq 146mA). |
| Quiescent current | 25mA (mains failed, internal sounder active, PSU & gen fault LED lit) |
| Max battery size and type | 2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah. |
| No. of detector zone circuits | 2 (Max. length per circuit is 500m). |
| Call point resistor value | 470 to 680Ω. |
| Max. devices per detector zone | 25 detectors (or 32 detectors/manual call points combined). |
| No. of conventional sounder circuits | 4 (Max. length per circuit is 500m). |
| EOL resistor value | 6800Ω 5% Tol. 0/25W (blue, grey, red, gold). |
| Alarm voltage | 27V max, 20V min (final battery voltage) |
| Max. sounder output current | 4 x 200mA (800mA total). |
| Auxiliary relays | Two: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc. |
| Open collector outputs | Two: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA, Max. open circuit voltag |
| Other outputs | 24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed). |
| Auxiliary inputs | Two: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger, Max. input voltage 27V (non-latching) |
| Engineer (AL3) functions | Program coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters al |
| Expansion connections | Yes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards. |
| Product dimensions (mm) | 380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required). |
| Construction & finish | Plastic lid and base; RAL7035 textured |
| IP Rating | IP30. |
| Weight | 1.75kg (without batteries) |
| Operating conditions/temperature | -5ºC to +40ºC. Max relative humidity: 95%. |
Related Products
Original price was: £749.99.£595.00Current price is: £595.00.
Original price was: £4.99.£2.99Current price is: £2.99.
£25.49
£24.99
£104.90