Name: C-TEC CFP702-4 2-Zone Conventional Fire Alarm Panel, LPCB &amp; EN54 Certified, Sounder Circuits, Keypad Access
Brand: C- Tec
SKU: 10370
Availability: InStock

C-TEC CFP702-4 2-Zone Conventional Fire Alarm Panel, LPCB & EN54 Certified, Sounder Circuits, Keypad Access

£154.99

Availability: 5 in stock Category: Fire Alarm Systems Brand: C- Tec

Add to wishlist

Fire alarm panel is a reliable and user-friendly system designed for easy installation and operation. It features two detector zones, four sounder circuits, and a built-in power supply, ensuring effective fire detection and response. With advanced functions like zone delay and test modes, it offers flexibility for various applications. Its sleek design allows for both flush and surface mounting, making it a practical choice for safety systems.

Description
Technical Specification

Description

C-TEC CFP 2 Zone Conventional Fire Alarm Panel

Certified Compliance: EN54 parts 2, 4, and 13 certified.
User & Installer-Friendly: Designed for easy operation and setup at a competitive price.
Flexible Mounting: Supplied in an attractive flush or surface-mountable plastic enclosure.
Zone & Sounder Circuits: Equipped with two detector zones and four conventional sounder circuits.
Input & Output Functions: Includes class change and alert inputs, along with on-board fire and fault relays.
Secure Access: Features combined keypad/keyswitch entry for enhanced security.
Advanced Engineering Functions: Offers selectable zone delays, coincidence, and non-latching zone facilities.
Diagnostics & Testing: Comprehensive test and fault-finding facilities ensure reliable system maintenance.

Approval	Certifed to EN54 Parts 2 & 4 by the LPCB., Certified to EN54-13 by Kiwa Telefication.
Mains supply	230V 50/60Hz.
Mains rated current	350mA maximum.
Internal power supply	19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to	1.5A @ 230Vac (ImaxA eq 146mA).
Quiescent current	25mA (mains failed, internal sounder active, PSU & gen fault LED lit)
Max battery size and type	2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.
No. of detector zone circuits	2 (Max. length per circuit is 500m).
Call point resistor value	470 to 680Ω.
Max. devices per detector zone	25 detectors (or 32 detectors/manual call points combined).
No. of conventional sounder circuits	4 (Max. length per circuit is 500m).
EOL resistor value	6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
Alarm voltage	27V max, 20V min (final battery voltage)
Max. sounder output current	4 x 200mA (800mA total).
Auxiliary relays	Two: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.
Open collector outputs	Two: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA, Max. open circuit voltag
Other outputs	24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed).
Auxiliary inputs	Two: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger, Max. input voltage 27V (non-latching)
Engineer (AL3) functions	Program coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters al
Expansion connections	Yes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards.
Product dimensions (mm)	380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required).
Construction & finish	Plastic lid and base; RAL7035 textured
IP Rating	IP30.
Weight	1.75kg (without batteries)
Operating conditions/temperature	-5ºC to +40ºC. Max relative humidity: 95%.
Model No	CFP702-4