C-TEC CFP704-2 AlarmSense 4 Zone Fire Alarm Panel – LPCB, EN54, Apollo Compatible
£242.54
C-Tec CFP704-2 is a 4-zone two-wire fire alarm panel designed for use with Apollo AlarmSense devices. Ideal for schools, offices, and commercial premises, it features simplified wiring, four sounder circuits, and built-in fire and fault relays.
- Description
- Additional information
- Technical Specification
Description
The C-TEC CFP704-2 AlarmSense 4 Zone Fire Alarm Panel is an LPCB-certified, EN54-compliant control panel designed for fast, flexible, and cost-efficient fire alarm installations. Engineered to work seamlessly with Apollo’s AlarmSense range of detectors, call points, sounders, and visual indicators, this intelligent two-wire system reduces installation time and labour by up to 25% compared to conventional four-wire systems.
Unlike standard fire alarm panels that require separate wiring for detection and notification circuits, the CFP704-2 allows both to be connected to the same pair of wires by using distinct voltage bands for quiescent and alarm states—making it an ideal solution for small to medium-sized commercial or residential buildings.
Key Features:
- 4 AlarmSense-Compatible Detection Zones – Designed for Apollo’s AlarmSense detectors, call points, and sounders.
- 4 Conventional Sounder Circuits – Provides wide-area alarm coverage.
- Certified to EN54-2 and EN54-4 – Verified by the Loss Prevention Certification Board (LPCB).
- 1.5A Switch Mode PSU – EN54-4/A2 compliant for reliable power distribution.
- User-Friendly Interface – Colour-coded control buttons with keypad/keyswitch access.
- Advanced Engineering Functions – Includes zone test mode, zone delay, coincidence detection, and non-latching zone configuration.
- Built-in Fire & Fault Relays – Plus remote and reset open-collector outputs.
- Class Change & Alert Inputs – Useful for school or public building integration.
- Expandable System – Connect up to 8 repeaters (CFP761 card required).
- Modern Design – Supplied with an attractive surface or flush mount plastic enclosure.
This panel is ideal for installers seeking a reliable and easy-to-configure fire detection system with the added benefit of two-wire efficiency. With full compliance to current standards and high compatibility with AlarmSense devices, the CFP704-2 delivers safety, flexibility, and value.
Additional information
| Brand | C- Tec |
|---|---|
| Model no | CFP704-2 |
| Approvals/certifications | Certified to EN54-2 & 4 by the LPCB |
|---|---|
| Mains supply | 230V 50/60Hz |
| Mains rated current | 350mA maximum |
| Internal power supply | 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault) |
| Quiescent current | 25mA (mains failed, internal sounder active, PSU & gen fault LED lit) |
| No. of detector zone circuits | 4 AlarmSense zone circuits compatible with Apollo’s AlarmSense detectors, call points, sounders & visual indicators (Max. length per circuit: 500m) |
| Call point resistor value | Only use AlarmSense call points |
| Max. devices per detector zone | 25 AlarmSense detectors/manual call points per AlarmSense zone |
| No. of conventional sounder circuits | 4 conventional (non-AlarmSense) sounder circuits (Max. length per circuit: 500m) |
| EOL resistor value | 6800Ω 5% Tol. 0/25W (blue, grey, red, gold) |
| Alarm voltage | 27V max, 20V min (final battery voltage) |
| Auxiliary relays | Two: (1) Aux. Fire; (2) Fault. Volt-free single pole changeover. Max. switch current: 1A; Max. switch voltage: 30Vdc |
| Open collector outputs | Two: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition). Max. sink current: 30mA |
| Auxiliary inputs | Two: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger (Max. input voltage: 27V) |
| Expansion connections | Supports optional network driver cards, relay output cards, and EN54-13 sounder circuit interface boards |
| Product dimensions (mm) | 380 W x 235 H x 96 D mm (hole required for flush mounting: 367 W x 220 H x 75 D mm, no bezel required) |
| Construction & finish | Plastic lid and base; RAL7035 textured |
| IP Rating | IP30 |
| Weight | 1.75kg (without batteries) |