Notifier FCM-1-REL Intelligent Fire Alarm Releasing Control Module for Solenoids

£55.90

Availability: Out of stock SKU: FCM-1-REL Categories: , Brand:

Reliable releasing control module designed to activate 24V or 12V solenoids in fire suppression systems, compatible with NOTIFIER intelligent fire alarm panels.

Description

The Notifier FCM-1-REL Releasing Control Module is a high-performance addressable module engineered for use in fire suppression systems that require precise and reliable solenoid activation. It features a redundant activation protocol, ensuring that a pair of signals must arm the module before release, with a built-in 3-second confirmation window to enhance safety and system integrity.

Designed for Class A or Class B operation, the FCM-1-REL supports one 24V solenoid or up to two 12V solenoids connected in series. It supervises wiring conditions and reports status—normal, open, or short circuit—directly to the fire alarm control panel. The module includes panel-controlled LED indicators, low standby current, and rotary address switches for easy setup.

Fully compatible with NOTIFIER intelligent systems using FlashScan protocol, the FCM-1-REL mounts easily in a standard 4-inch electrical box and provides fault-tolerant wiring options for critical fire suppression applications. Ideal for commercial, industrial, and high-risk environments where solenoid-based releasing systems are used.

Additional information

Model No

FCM-1-REL

Brand

NOTIFIER

Normal Operating Voltage15 to 32 VDC Nominal
Average Operating Current700µA (LED flashing)
Maximum Activation Current9.0 mA (red LED on)
Normal Operating Voltage24 VDC Nominal
Maximum Line Loss2.3 VDC (total allowable loss from power supply to module and from module to solenoid)
Minimum Operating Voltage to Activate Solenoid18 VDC (at solenoid)
Standby Current6.4 mA
Activation Current10 mA
Maximum Activation Current2.00 A
Supervisory Loop Voltage3.3 V
Supervisory Loop Current (Normal)30 mA
Temperature Range14°F to 140°F (-10°C to 60°C)
Humidity10% to 95% RH Non-condensing
Dimensions4 1/2˝ H × 4˝ W × 1 1/4˝ D (106 mm H × 108 mm W × 31 mm D)
AccessoriesWall cover plate (included); SMB500 Surface Mount Electrical Box (for indoor dry applications only)

Related Products