Fike CIE-A-200 Addressable Fire Alarm Control Panel – 1-Loop, 200 Devices, LCD Display, Intelligent Fire Detection
£649.95
Fike CIE-A-200 is a 1-loop addressable fire alarm panel supporting up to 200 devices with soft addressing, 32 fire zones, and advanced cause & effect programming.
- Description
- Additional information
- Technical Specification
Description
The Fike CIE-A-200 Addressable Fire Alarm Control Panel offers intelligent fire detection and system management in a compact 1-loop design. Capable of supporting up to 200 addressable devices over a 2km loop, it provides robust protection for small to medium-sized premises while allowing seamless scalability with repeater panel support.
The CIE-A-200 features soft addressing to simplify installation and eliminate errors caused by duplicate physical addresses. Devices are configured either directly at the panel or via Fike’s OSP programming software, with all parameters stored in device memory for quick, reliable communication.
With 32 configurable fire zones and 32 output zones, the panel supports complex cause & effect logic across multi-stage alarms, confirmation delays, and zone-based activation. For extended control, it includes 2 monitored inputs, 2 monitored outputs, configurable relays, and a fault relay.
Designed for ease of use, the CIE-A-200 includes a graphical LCD interface, intuitive user navigation, and enhanced tools for service and diagnostics. It also stores up to 1,000 fire and fault events, helping maintenance teams manage system performance effectively.
Whether upgrading an existing system or installing new, the Fike CIE-A-200 delivers dependable, modern fire detection in a user-friendly format.
Key Features
- 1-loop addressable control panel for up to 200 devices
- Supports a 2km maximum loop length
- Soft addressing eliminates manual device addressing
- Compatible with Fike ASD addressable range
- 32 fire zones & 32 output zones with cause & effect logic
- 2 monitored input circuits and 2 monitored output circuits
- 2 configurable relays plus 1 fault relay
- Peripheral bus supports up to 8 repeater panels
- LCD graphical display with intuitive interface
- Event log stores up to 1,000 fire and fault events
- Faster, more reliable digital communication
Additional information
| Brand | Fike |
|---|---|
| Model | CIE-A-200 |
| Panel Dimensions (WxHxD) | 353mm x 333mm x 117mm |
|---|---|
| Operating Temperature | 5°C to 40°C |
| IP Rating | IP30 |
| Mains Supply Input | 230V AC Nominal |
| Standby Battery Requirement | 2 x 7Ah 12V Sealed Lead Acid (2 x 12Ah with extended battery box) |
| Max Number of Loops | 1 |
| Max Loop Length | 2000 Metres |
| Max Conductor Resistance | 24 Ohms |
| Loop Loading | 450 DLU (200 Devices Max)* |
| Loop Operating Voltage | 40V DC |
| Standby Voltage | 24V DC |
| Max Loop Current | 500mA |
| Number of Supported Zones | 32 |
| LCD Display | LCD Graphical Display |
| Device Labels | 31 Characters |
| Event Log | 1000 Events |
| Repeater Panels | 8 Max |
| Aux Power Output | 30V DC 450mA |
| Inputs and Outputs | Inputs: 2 x Monitored Inputs (3k3 EOL, 680R Firing Resistor) Outputs: 3 x Volt-Free Relay (30V DC @ 1A Max) Monitored Outputs: 2 x (24V DC @ 500mA Max, 10k EOL). Each monitored output may be configured as a Conventional Sounder Circuit, a Remote Fire Circuit, or a Common Fault output. |